Gtech Fitness® Glassless Mirrors are available in wall mounted, which we term "Glassless Gym Mirrors", or with rolling stands, our "Glassless Dance Mirrors". They offer a safe, lightweight mirror alternative to traditional glass without sacrificing image quality and are ideal for home, schools, studios, theater productions and much more! They offer a higher reflective surface than most household glass mirrors.
Our glassless mirrors are not produced by MirrorLite®. However, they do use the same technology with minor differences, especially in terms of the aluminum frame. Our frame uses machine-cut aluminum with 4-corner certified welds, while theirs uses single weld notch system. The reflective material for both is derived from Mylar® film, a resilient polyester material that is extremely heat sensitive, shrinking very tightly when heat is applied. When the material is placed over the aluminum frame, it is then heat-shrunk to create a perfectly flat surface. This flat surface ensures there is no image warping that can even be seen in large mirror panels made of glass.
Take the overall safety and liability of glassless mirror investment to a whole new level with the ASTM E CLASS 84 A (CLASS I) Fire Rating! Competitors boasting a UL Rating from Underwriter Laboratories, Inc.® as a superior fire rating and going so far as to say an ASTM rating is not valid are not disclosing that the UL 723 Test is a test using the ASTM E84 Testing Method. The ASTM E84 Testing Method is the same testing method used for Gtech Fitness® Glassless Mirrors. For more on this subject, view this document directly from Underwriter Laboratories, Inc.®. To learn more about flame spread testing and building code requirements, click here.
- Lightweight Fully Welded Internal Aluminum Frame
- 90-92% Reflective (Household Mirrors are typically around 70%)
- Wall Mounted Mirrors: L-Brackets and Screws for Mirror Back Included
- Customer must supply four screws per mirror for the mounted wall type
- Can mount vertically or horizontally on wall
- Mirror Thickness: 1.25"
- Easy To Install
- No Distortion or "Fun House Mirror" Effect
- Made in the USA
- Independently tested using the ASTM E84 Testing Method to obtain an ASTM Class A Fire Rating
- Not designed to be leaned against for exercises.
All Mylar® Mirrors can be damaged with sharp objects and are recommended for supervised settings when placing in commercial facilities.
How to Install:
View Installation Instructions
How To Clean:
Start by blowing off dust with canned air or compressed air for large surfaces. Spray Windex onto an lens safe cloth. Do not use regular towels or paper towels. Use short, wiping strokes in one direction. Do not use a circular motion.